My Basket:
MaidAid C1010D Pass Through Dishwasher with Drain Pump
Product Code: MaidAidC1010D
Buying this product would qualify you for a
6-PIECE KNIFE BLOCK SET (R.R.P. £39.95) for only 1p!
Offer strictly 1 per customer
6-PIECE KNIFE BLOCK SET (R.R.P. £39.95) for only 1p!
Offer strictly 1 per customer
Description
Related Products
MaidAid® C1010 Pass Through Dishwasher with Drain Pump
- 2 YEARS PARTS AND LABOUR WARRANTY
- 500x500 Rack size (mm)
- Supplied with one open and two plate racks
- Fitted with type 'A' Air gap breaktank
- Built in Rinse Aid Dispenser
- Drain Pump
- 400mm Usable Height
- Up to 1080 Plates Per Hour
- Cycle Time: 60 or 120 seconds
- Surface Tray Filter - to prevent debris from contaminating wash water
- Self Draining wash pump - to reduce health risk from bacteria build up
This machine uses mains water. If you have no suitable water treatment then limescale may impair the effectiveness of the machine and reduce the operational lifespan.
We strongly recommend using a 16ltr Water Softener with this machine. If you require advice about this please do not hesitate to contact us on 0800 026 0223.
FAULTS CAUSED BY LIMESCALE ARE NOT COVERED UNDER WARRANTY
Additional Information
Power Type: 4.8 or 6.8 Single Phase or 6.8 3 Phase
Power Requirements: 20A or 30A for Single Phase or 10A per Phase on 3Phase
Warranty: 2 Years Parts and Labour Warranty
Ext. Dimensions (WxDxH): 720 x 810 x 1450 (mm)
